POLYPIPE Ring Seal Soil and Vent 110mm Double Branch 92.5Deg 2 Boss, White, SU420W
POLYPIPE Manufacturer's Part Number: SU420W.
POLYPIPE Ring Seal (Push-Fit) Soil & Vent Fitting - Ø110mm/4'' Equal 92.5 degrees Double Branch with 2 boss shoulders; White.
- Polypipe Soil & Vent: Ring Seal Soil & Vent equal single branch, used for joining double branch pipes to vertical pipe at 92.5 degrees angle; To be used in vertical position ONLY.
- Connections (Top x Branch x Branch x Bottom): Ring Seal (push-fit) Socket x Ring Seal (push-fit) Socket x Ring Seal (push-fit) Socket x Spigot (fits into another socketed pipe, fitting or connector).
- 2 x Ø60mm boss shoulders/sockets: All boss shoulders provided are a common size and will accept Ø32mm, 40mm and 50mm waste pipes using a comprehensive range of boss adaptors; where a boss shoulder is moulded solid, it should be drilled through with a Ø60mm hole saw.
- Outer dimensions: Ø110mm/4''.
- Wall thickness: 3.20mm.
- Material: PVCu; Manufactured to BS EN 1329-1 and BS 4514 (PVCu soil pipes & fittings: 110mm).
- Colour: White.
- Note: Polypipe soil and waste systems are suitable for short intermittent discharges of hot and cold water in normal domestic installations in the UK. They are not suitable for continuous discharge at elevated temperatures.