POLYPIPE Ring Seal Soil and Vent 110mm Access Branch 112.5Deg 2 Boss, Brown, ST412BR
POLYPIPE Manufacturer's Part Number: ST412BR.
POLYPIPE Ring Seal (Push-Fit) Soil & Vent Fitting - Ø110mm/4'' Equal Single 112.5 degrees Branch with screwed access cap and 2 boss shoulders; Brown.
- Polypipe Soil & Vent: Ring Seal Soil & Vent equal single branch, used for joining branch pipe to vertical pipe at 112.5 degrees angle, comes with screwed access cap for pipe cleaning/inspection.
- Connections (Top x Branch x Bottom): Ring Seal (push-fit) Socket x Ring Seal (push-fit) Socket x Spigot (fits into another socketed pipe, fitting or connector).
- 2 x Ø60mm boss shoulders/sockets: All boss shoulders provided are a common size and will accept Ø32mm, 40mm and 50mm waste pipes using a comprehensive range of boss adaptors; where a boss shoulder is moulded solid, it should be drilled through with a Ø60mm hole saw.
- Outer dimensions: Ø110mm/4''.
- Wall thickness: 3.20mm.
- Material: PVCu; Manufactured to BS EN 1329-1 and BS 4514 (PVCu soil pipes & fittings: 110mm).
- Colour: Brown.
- Note: Polypipe soil and waste systems are suitable for short intermittent discharges of hot and cold water in normal domestic installations in the UK. They are not suitable for continuous discharge at elevated temperatures.