FIT322B POLYFIT 3 METRE WHITE 22MM BARRIERPIPE STRAIGHT LENGTHS
£7.99 Inc VAT
£6.66 Exc VAT
£19.02 RRP 58% Saving
Available for same day despatch
if order placed before 3:00pm
Out of stock
Stock available for despatch
in approximately 2 days
Manufacturers part number: FIT322B
Polypipe Polyfit 22mm x 3m barrier pipe, straight cut length, material: Polybutylene with EVOH barrier, colour: white.
Polyfit is the one step, fully demountable and reusable pushfit plumbing product, which combines with white polybutylene pipe to create a truly flexible, yet highly secure, plumbing system that is demountable and reusable when required.
Polyfit polybutylene pipe features and benefits:
Flexibility - flexible pipe means it can more easily be ‘cabled' around obstructions.
‘Cabling' the pipe means fewer joints are required.
Fewer joints reduce installation time and system costs.
Push-fit means no naked flames with reduced inherent risks.
Good resistance to freezing temperatures, maintaining long-term durability in heating and water applications.
Long-term performance benefits over traditional rigid metal systems:
Plastic pipe means no scale build-up.
No corrosion and reduced risk of burst pipes.
Quieter in service, cooler to the touch and less heat loss.
Straight pipe is just as flexible as coiled pipe and is primarily intended for exposed pipework where neatness is vital, or where only a short length of pipe is required.
NOTE: Polybutylene pipe must not be used for long permanently exposed runs of pipe where appearance is important.
Designed for central heating systems.
Incorporates an oxygen barrier to inhibit oxygen permeation.
Use of inhibitors is recommended as corrosion can occur in all types of system regardless of pipe material.
May also be used for domestic hot and cold water services.
For more detailed information, please refer to Polyfit Plumbing and Heating Brochure
WRAS Listed in the WRAS Water Fittings and Materials Directory.
Standards Manufacturing Quality Assurance - in accordance with BS EN ISO 9002 (BSI registered firm Certificate FM00318).
Installation Standard - to follow the requirements of BS5955 - PART 8 2001 Plastic pipework (Thermoplastic Materials).
British Standard - Class S rated to BS7291 Part 1 and itemark Licence Number 38148 to BS7291 Part 1 & 2.
British Gas - has accepted the Polyfit Class S Polybutylene ipe system as being acceptable for open vented and sealed entral heating systems and are eligible for acceptance onto Home Care Central Heating System Cover.
Guarantee - Polypipe guarantees for 25 years against defects in materials or manufacture of the Polyplumb and Polyfit hot and cold water supply and heating systems from the date purchased. This guarantee only applies if the products are installed in accordance with the manufacturers recommendations and are used in a normal domestic operation.