MANROSE 100MM BATHROOM EXTRACTOR FAN W/TIMER+HUMIDISTAT+PULLCORD
Cat. No. XF100HP - Ø100mm (4'') Square Bathroom/Toilet Extractor Fan with Adjustable Humidity Control, Integral Adjustable Electronic Timer and Pullcord Override Switch.
- Designed for wall mounting only, complying with building regulations on ventilation (F1), through Ø102mm (4'') flexible ducting/rigid pipes or Manrose low profile flat channel ducting systems.
- Easy to install and maintain, comprehensive wiring and installation instructions are included with each fan.
- Long life motor - single phase induction motor with pre-oiled bearings fitted for a long maintenance free life.
- Complete with Humidistat (Humidity Control) which is adjustable between 40% RH and 95% RH.
- Timer model, incorporates integral electronic timer adjustable between 1 and 20 mins.
- Includes a pullcord override facilty for manual operation. It requires no switched live supply.
- Quiet and efficient - quiet motor has an extract rate of 85 m³/hr, 23 ltrs/sec; Fan speed: 2,400 r.p.m; Noise: 41.0 dB(A) quiet operation.
- Manufactured using impact resistant high gloss ABS thermoplastics for strength and durability, aesthetics and easy cleaning.
- Maximum pressure: 120 p.a.
- Wattage: single phase 14W.
- Maximum operating temperature: 40ºC.
- 220-240V - AC. 50Hz.
- White finish.
The fan is double insulated and does not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted. The fan must not be accessible to a person using either the shower or bath and mounted a minimum of 1.8 metres from the floor.
For more information, please visit this products specification webpage.
Products installation instructions manual.