MIRA Jump Multi-Fit 9.5kW Electric Shower c/w Shower Kit, White/Chrome, 1.1788.011
£123.00 inc. of VAT
£102.50 ex. of VAT
*** THIS PRODUCT IS NOW OBSOLETE. ***
*** PLEASE NOTE: This product is now obsolete/discontinued and no longer available for order. We recommend MIRA Jump Multi-Fit 9.5kW (MPN 1.1788.011), which is a new version of MIRA Jump 9.5kW, if you are looking for a similar shower. Thank you ***
MIRA Manufacturer's Product Code: 1.1693.002.
The Mira Jump 9.5kW Electric Shower Kit is a dual control retrofit electric shower with adjustable height slide bar and Ø90mm 4-spray shower head with rub-clean nozzles; designed for wall mounted installations; White/Chrome finish.
The Mira Jump Electric Shower was specifically designed for easy replacement of right inlet electric showers and retrofits Triton, Aqualisa and many other electric showers with right hand water inlets. The Mira Jump Electric Shower is a simply way to upgrade your electric shower if it has a right handed water inlet. Most electric showers only offer a left hand connection but now with the Jump Electric shower you can upgrade to a Mira Electric Shower with an easy installation.
The Mira Jump 9.5kW Electric Shower has separate controls for heater selection and for temperature/flow adjustment. A unique flow regulator stabilises any temperature changes caused by water pressure fluctuations, which can result from taps being turned on/off or toilets being flushed.
The Mira Jump Electric Shower features:
- Manual temperature control.
- Separate power and flow/temperature controls with push button start/stop to fine tune perfect shower.
- Set and Forget controls: Push button on/off so you can leave the power and temperature controls at your preferred setting.
- ECO power setting uses less energy and water - particularly beneficial during the warmer summer months.
- Clearscale™ technology cuts limescale by half for a better performing, longer lasting shower - this Mira Jump electric shower features patented DualElement™ heater tank which contains two separate heating elements wound together for a more even distribution of heat, reducing hot spots where limescale can build up..
- Right sided swivel water inlet caters for rising, rear and side entry connections via push-fit or compression fittings.
- Easy retrofit with adjustable fittings and a generous foot print.
- Dual terminal blocks on left and right side for easy connection.
- Removable case inserts and tunnel - eliminating the need for time consuming case cutting allowing easy access for water connections.
- Ø90mm shower head with rub-clean nozzles for easy limescale removal; 4 spray patterns: Start/Calm/Blast/Eco.
- Adjustable slide bar fits over holes left by a previous shower kit fittings, supplied with adjustable clamp bracket assembly and plastic soap dish.
- Application: Domestic/light commercial use only.
- White/Chrome finish.
- KIWA UK and BEAB Approved.
- Mira Manufacturer's Guarantee: Domestic installations - 2 years (shower fittings - for 1 year); non-domestic installations - 1 year.
Please note: The Mira Jump Electric Shower is not specifically designed to retrofit other Mira electric showers. The Mira Sport is recommended if you have left side water inlets.
The Mira Jump 9.5kW Electric Shower specifications:
- Mains cold supply only.
- Min. Maintained Inlet Pressure: 0.7 bar.
- Water entry points: Right (rising and rear).
- Cable entry points: Left or right (rising, falling and rear).
- Inlet Connection: 15mm plastic swivel stub compression or 10mm microbore pipe.
- Outlet Connection: 1/2" BSP male.
- Nominal Power @ 240 V AC: 9.5 kW.
- Temperature stability: ± 6°C.
- Supply Rating: 40 A.
- Rating: IP X4.
- It is recommend that a non-restrictive (free-flowing) isolating valve is fitted in the cold water supply pipe to allow the comp