POLYPIPE Ring Seal Soil and Vent 82mm Access Pipe Single Socket 2 Boss, Grey, SA343G

£13.92 inc. of VAT

£11.60 ex. of VAT

£32.93 RRP

58% Saving



free delivery

POLYPIPE Manufacturer's Part Number: SA343G.

POLYPIPE Ring Seal (Push-Fit) Soil & Vent Fitting - Ø82mm/3'' Single Socket Access Pipe with access saddle and 2 boss shoulders; Grey.

Where the discharge stack has a long drain connection to an inspection chamber, access for rodding and testing should be provided at or near the base of the stack. When ground floor appliances are connected to the soil stack, the access point should be sited above the spillover level of the appliances.

For multi-storey domestic buildings, access into the stack should be provided at 3 storey intervals and for multi-storey commercial buildings access should be provided on each floor.

Product features:

- Polypipe Soil & Vent: Ring Seal Soil & Vent fitting with access saddle used for pipe cleaning/inspection.
- Connections: Ring Seal (push-fit) Socket x Spigot (fits into another socketed pipe, fitting or connector).
- 2 x Ø60mm boss shoulders/sockets: All boss shoulders provided are a common size and will accept Ø32mm, 40mm and 50mm waste pipes using a comprehensive range of boss adaptors; where a boss shoulder is moulded solid, it should be drilled through with a Ø60mm hole saw.
- Outer dimensions: Ø82mm/3''.
- Wall thickness: 3.20mm.
- Material: PVCu; Manufactured to BS EN 1329-1 and BS 4514 (PVCu soil pipes & fittings: 82mm).
- Colour: Grey.
- Note: Polypipe soil and waste systems are suitable for short intermittent discharges of hot and cold water in normal domestic installations in the UK. They are not suitable for continuous discharge at elevated temperatures.