POLYPIPE PolyFit Flexi Hose w/ Service Valve 22mm x 3/4" x 300mm, FIT8422
POLYPIPE Manufacturer's Part Number: FIT8422.
POLYPIPE PolyFit 300mm Flexible Hose Tap Connector with Integral Service Valve (Isolator), 22mm x 3/4" BSP, PolyFit Push-Fit Socket x Tap Connecting Nut; NOT suitable for central heating.
- 22mm end: Polyfit Chrome Plated Service Valve, incorporates the Polyfit push-fit feature.
- 3/4" end: Tap Connection Nut, hand-tightened, contains captive rubber seals ensuring that seals are not lost or damaged on site.
- Length: 300mm.
- Fully demountable and re-usable push-fit plumbing fitting.
- Fitting locks tight, preventing accidental release.
- Reduces the number of joints within a system and is ideal for use in tricky to reach or tight locations.
- Suitable for use in hot and cold water systems in domestic properties.
- Suitable in both hard and soft water areas.
- Not suitable for transportation of gases, not suitable for use on systems with a high concentration of Chlorine.
- Not suitable for central heating.
- Guarantee: Polypipe guarantees for 25 years against defects in materials or manufacture of the PolyFit hot and cold water supply and heating systems from the date purchased. This guarantee only applies if the products are installed in accordance with the manufacturers recommendations and are used in a normal domestic operation.